Banner

Quicklink
Control System with IDS

Drifter

DESCRIPTION

The all new QuickLink™ control system with IDS is all about connections. Without a doubt the most important piece of kiteboarding equipment is a control system with the ability to securely connect and dis-connect on demand. It shatters the status quo and sets an entirely new standard in design. From its functional form to its ergonomic geometry to its proven handling of security, the QuickLink control system raises the bar to a new untouchable height.

FEATURES

  • Ergonomic design
  • Internal Swivel
  • Spinning Leash Connection
  • IDS - Intelligent Depower System
  • 3 Levels of Security
  • Floating BAR ends
  • Flex Grooves
  • Multibore Tubing
  • Wider CENTER hole fitting
  • Recoil
  • Removable security pin

SIZE

BAR
65 QUICKLINK IDS
60 QUICKLINK IDS
55 QUICKLINK IDS
48 QUICKLINK IDS
42 QUICKLINK IDS




Manually unspin any twists in flying lines. The worlds first fully spinning center line landing system.
The leash can rotate freely around the harness loop.
QuickLink uses our proven IDS method of 3 Stage Security. A system which was first developed by Cabrinha and has become the industry’s gold standard in security.
STAGE 1 : Depower on Demand (push bar away) STAGE 2 : IDS Activation(Push Quick Link unit away) STAGE 3 : Disconnect from Kite
The EVA bar ends are shaped to create a smooth transition from the bar grip to the bar end. The bar ends have smooth curves and edges and the EVA is forgiving when coming into contact with the body. The EVA bar ends have been lowered and widened to accommodate the entire line set wound onto them.
Easily removable for unhooked riding. The center location of the pin also serves to reduce foul hooking.
The EVA bar ends are buoyant enough to float the entire control system with lines attached.
The tips have flex grooves which aid in the bending of the tips while winding your lines onto the bar, and also aid in steering impulse.
Cabrinha was the first to introduce the multibore tubing to internalize the center mainline as well as the 500kg landing line. Internalizing both lines decreases the external clutter on the control system and the PU tubing serves as protection from the constant action of the bar against the lines.
Steering and sheeting is much smoother with the increase in the diameter of the center hole fitting. The hole is now 2mm wider in diameter and the radius surrounding the hole has been increased 10 degrees to allow for reduced friction when steering.
A spring loaded function which always keeps the bungee trim adjusters contained and well within reach. Making it the cleanest trim adjustment system on the market. With Recoil™ there is never a loose adjustment tail as seen with most above or below the bar trim systems.