G. Centerline (KS1CENTLE)

Contents: 1 x Centre Line.  
     
Tools Needed: Fishing Line (2m).  
1: Attach the upper end of the Centre line to the lower Stainless Ring on the Swivel using a loop to loop connection. (fig 1)

2: Attach the lower end of the Centre Line to the upper end of the Centre Line Adjuster using a loop to loop connection. (fig 2)

3: Create a larkshead loop on the bottom of the Centre Line Adjuster.

4: Pass the larkshead through the upper triangle link on the CAS (fig 3) and then pull through the Front Flying lines (fig 4). Reattach the larkshead now onto the correct knot on the Centre line Adjuster. (fig 5)

5: Pass the fishing line through the IDS line loop creating a loop and then pass this down through the Depower Main line. (fig 6) Pull through the fishing line which in turn pulls the IDS line (fig 7)

6: Reattach the IDS ring to the end of the IDS line and reset on the IDS Harness Loop. (fig 8)