F. IDS Landing Line Tensioner (KS1CTAJER)

Contents: 1 x Landing line Tensioner  
     
Tools Needed: Fishing Line (2m).  
1:Attach the end of the IDS Landing Line Tensioner to the same Stainless Swivel Ring as the Centre Line. (fig 1)

2: Using a loop to loop connection connect one end of the IDS Landing Line to the bottom loop of the IDS Landing Line Tensioner. (fig 2)

3: Pass the fishing line through the IDS line loop creating a loop and then pass this down through the Depower Main line. (fig 3) Pull through the fishing line which in turn pulls the IDS line. (fig 4)

4: Reattach the IDS ring to the end of the IDS line and reset on the IDS Harness Loop. (fig 5)