Entry Level Learning
The Genesis kite is a scaled down, no strut inflatable kite, designed to teach students how to operate a fully functioning 4 line kite. It’s able to demonstrate real world techniques of water launching by pulling on the left or right leader lines, and the important techniques of operating a 1X security system. The Genesis is designed to be used with a standard Overdrive control system so students will be familiar with all the control and security features by the time they get on the water for their first lesson.
Cabrinha’s exclusive line of high-quality woven fabrics has been designed specifically for kitesurfing. Unlike many of the generic sailcloths available in today’s kites, the Volae materials have been specially developed to our exact specifications. The development process has taken over 5 years to create this dedicated kite material, which delivers the lowest stretch and highest durability on the market.
All Cabrinha kites are designed and built on a Skeletal Frame foundation. We start by placing the most durable, 160 gsm Dacron material into a framework that locks in the intended shape. We then create the canopy shape and profiles with a light weight yet highly durable 53 gsm polyester woven material. We build on the durability of the canopy material with a second layer of 53 gsm two-ply material over the high stress strut sections. Next, we layer into the perimeter a 75 gsm, double ripstop reinforcement material to combat the extreme loads that are placed on the trailing edge and wing tip areas of the kite. Finally, we complete the kite with details such as molded EVA chafe protectors, robust leading edge protectors, and triple row stitching at the high stress inter-segment seams near the center of the kite. We seal it all up with a woven nylon ribbon reinforcement on the leading edge closing seam.
The 1X is not a depower system, it is a full blown shut down system. The 1X relies on only one line to immediately shut down the power of the kite whether it be on land or water in all wind conditions.
Power Control settings quickly adjust the power level of the kite. Each rear line “pig tail” connector has three power positions which you can connect to. The middle position is the factory recommended position. Create more power by connecting the knot closest to the kite or less power by connecting to the knot closest to the rider.
Kites are carefully constructed by hand using the most cutting edge technologies and materials available today. The secret to our ultra durable construction lies in the experience gained building the world’s best kites for over a decade.