FUSION X-SERIES WINGS

Name: FUSION X-SERIES WINGS
Brand: cabrinhakites
SKU: K2FWXFWNG-070XXX
Availability: InStock

SKU: K2FWXFWNG-070XXX

When we introduced the X-Series wings, we took Cabrinha’s foil program to a whole new level. Through working alongside SINTEF and the University of Norway where we were able to fully breakdown and simulate hydrofoil performance in the world's largest cavitation tank. From this we have been able to further evolve the X-Series into the industry’s leading all round hydrofoil. Early lift, but with a high top speed has been achieved, and through refined tip shape and profile, you are able to break the tips free, but still be ready to carve into your next turn.

Set includes:
Front wing, wing covers.

Design Profile

Swept LE, Straight TE, Ultra lean efficient profile, moderate anhedral.

Features

Loose and agile
All round lean profile
Refined tip shape
Tapered fit
Torsional Stiffness
Medium AR
PMI core
Pre Preg construction
Modular

Choose Your Size:

X700cm^2 (K2FWXFWNG-070XXX) - WS 640mm / AR 5.85 / Chord 140 X930cm^2 (K2FWXFWNG-093XXX) - WS 750mm / AR 6.05 / Chord 165 X1240cm^2 (K2FWXFWNG-124XXX) - WS 870mm / AR 6.10 / Chord 190 X1650 cm^2 (K2FWXFWNG-165XXX) - WS 1010mm / AR 6.18 / Chord 220 X2100 cm^2 (K2FWXFWNG-210XXX) - WS 1150mm / AR 6.01 / Chord 255

Variant

Find a Dealer Near You

FUSION X-SERIES WINGS

$0.00

Key Features

LOOSE AND AGILE

Through refined profiles, moderate aspect ratio and an all new wingtip shape, the X-Series MkII is the ultimate foil for maneuverability, no matter the board or sport you do.

ALL AROUND LEAN PROFILE

The all around lean profile still maintains the forgiving low-end that the X-Series is known for, but now boasts an increased speed range.

FEELING TIPSEY

The all new tip design allows you to be able to free the tips in a turn, but be confident that the foil will re-enter without cavitation. This is one specific area of research & testing undertaken at the SINTEF facility.

TAPERED FIT

The ergonomic tapered connection between the fuselage and mast provides the ultimate in rigidity, while still being easy to assemble and disassemble.

TORSIONAL STIFFNESS

Through the use of a PMI core and the layered Pre Preg carbon sheets, the H-Series MKII sets a new benchmark for hydrofoil torsional stiffness.

MEDIUM AR

The medium aspect ratio design allows for early lift and a stable forgiving ride.

The brass through bolt adds torsional stiffness to the wing/mast connection point, providing increased response during turns or while pumping, especially on the larger size front wings.

Pre coated carbon sheets allow for an extremely accurate level of resin absorption. Combined with an exclusive interweave design that follows the shape and profile of the wings, you have unparallel levels of torsional stiffness and reflex response.

The modularity of the CAB Fusion system allows you to seamlessly interchange between any of the X-Series and H-Series front wings and stabilizers.

3D View

For Winging "I usually ride the X-series MKII 930 or the H800 with the V-series tail stabilizers 180 and short fuselage, and sometimes some much bigger front wings for cruising, In addition to the 80cm carbon mast. Wing Setup: X930MKII, 80cm Carbon Mast, V180 stabilizer, 276mm Fuselage. For Kiting, to me, the best Kite foil set up you can have, Is the Logic 110 and sometime the 130 for jumping and having more volume on the landing, combined with the X-700 MKII with the 80cm carbon mast and the V-series tail stabilizers 180 and short fuselage Kite Setup: X700, 80cm Mast, V180 stabilizer, 276mm Fuselage." - Theo

WIND / WEIGHT CHART