Style Selector

Lift Factor
  • Speed Factor
  • Maneuverability
  • Directional Stability
  • Drive
  • HI:RISE CARVE

    ALL-AROUND FREERIDE KITESURF

    Sizes: 65, 85 CM MAST

    The HI:RISE CARVE is specifically designed for any rider looking for a diverse wing set, which will take you from your first steps, to next level freeride and waves.

    The Carve wing is a modern high lifting wing set that is highly manoeuverable bringing you an entirely new level of performance and fun. With its signature winglets, the HI:RISE CARVE is a stable and easy foil to fly. The lower aspect ratio outline combined with the foil cross section requires very little input from your kite to get flying. Once up, the sky is the limit. The added lift comes into play whether you are carving turns in the pocket or pumping through lulls. 

    The winglets provide an added level of stability to the wing and reduces induced drag, increasing aerodynamic efficiency, especially when riding through turbulent waters. The rear wing can be adjusted forward or aft to increase the ability to "carve" or facilitate a more 'locked-in' ride. These light weight wings are constructed with a Pauwlonia wood core and durable Basalt fibers. The wingset mounts to our all new 75cm (29.5 inch) wide nosed fuselage. The wider nose of the fuselage facilitates a significantly more stable connection to the wing. 

    The wing set and fuselage are compatible with the Cabrinha foil eco system. Choose the mast length that suits your style and performance needs. Board match: AutoPilot, X-Breed Foil, Double Agent.

    Please note the updated screw sizings for the Carve front wing:

    Front hole: 38mm / Middle hole: 38mm / Rear hole: 27mm
    Not sure? Check out the Foil User Manual

    DESIGN PROFILE
    Low aspect ratio, low planing profile section, moderately swept outline, compound anhedral.

    COMPONENT FEATURES

      • NEW 750mm extended Widenose Fuselage with improved stability and hydrodynamics
      • NEW adjustable rear wing positioning for increased ability to "carve" or facilitate a more 'locked-in' ride
      • Aircraft-grade extruded, anodized 6061-T6 aluminium components
      • Hollow core Mast extrusion for improved floatation and minimal weight
      • Lightweight top socket with indicator for use on industry standard track mounting system or 4 point connection

     WING FEATURES

      • NEW A-Grade Paulownia wood core with unmatched strength / weight ratio
      • NEW front wing - volcanic triple layer Basalt fiber construction
      • NEW rear wing - forged composite construction
      • NEW ABS insert reinforcements

     

    TECH SPECS

      • Chord: 226mm
      • Projected area: 116,508.2 mm²
      • Wingspan: 685.4mm
      • AR: 4.0
      • Volume: 2,024,170 mm³

    Set includes:
    Top socket, mast, fuselage, grease, wing protectors, foam insert, 5mm allen key (5mm). Component screws: m8x25mm (4pcs),  m8x40mm (4pcs), Front wing screws: m8x45mm, m8x40mm, m8x27mm, rear wing screws: m8x20mm (2pcs).

    + Show More
    Find a Dealer Near You
    ["[\"

    The HI:RISE CARVE is specifically designed for any rider looking for a diverse wing set, which will take you from your first steps, to next level freeride and waves.

    \\n

    The Carve wing is a modern high lifting wing set that is highly manoeuverable bringing you an entirely new level of performance and fun. With its signature winglets, the HI:RISE CARVE is a stable and easy foil to fly. The lower aspect ratio outline combined with the foil cross section requires very little input from your kite to get flying. Once up, the sky is the limit. The added lift comes into play whether you are carving turns in the pocket or pumping through lulls. 

    \\n

    The winglets provide an added level of stability to the wing and reduces induced drag, increasing aerodynamic efficiency, especially when riding through turbulent waters. The rear wing can be adjusted forward or aft to increase the ability to \\\"carve\\\" or facilitate a more 'locked-in' ride. These light weight wings are constructed with a Pauwlonia wood core and durable Basalt fibers. The wingset mounts to our all new 75cm (29.5 inch) wide nosed fuselage. The wider nose of the fuselage facilitates a significantly more stable connection to the wing. 

    \\n

    The wing set and fuselage are compatible with the Cabrinha foil eco system. Choose the mast length that suits your style and performance needs. Board match: AutoPilot, X-Breed Foil, Double Agent.

    \\n

    Please note the updated screw sizings for the Carve front wing:

    \\n

    Front hole: 38mm / Middle hole: 38mm / Rear hole: 27mm
    Not sure? Check out the Foil User Manual

    \\n

    ", "

    \\n

    DESIGN PROFILE
    Low aspect ratio, low planing profile section, moderately swept outline, compound anhedral.

    \\n

    ", "

    \\n

    COMPONENT FEATURES

    \\n
      \\n
        \\n
      • NEW 750mm extended Widenose Fuselage with improved stability and hydrodynamics
      • \\n
      • NEW adjustable rear wing positioning for increased ability to \\\"carve\\\" or facilitate a more 'locked-in' ride
      • \\n
      • Aircraft-grade extruded, anodized 6061-T6 aluminium components
      • \\n
      • Hollow core Mast extrusion for improved floatation and minimal weight
      • \\n
      • Lightweight top socket with indicator for use on industry standard track mounting system or 4 point connection
      • \\n
      \\n
    \\n

     WING FEATURES

    \\n
      \\n
        \\n
      • NEW A-Grade Paulownia wood core with unmatched strength / weight ratio
      • \\n
      • NEW front wing - volcanic triple layer Basalt fiber construction
      • \\n
      • NEW rear wing - forged composite construction
      • \\n
      • NEW ABS insert reinforcements
      • \\n
      \\n
    \\n

     

    \\n

    TECH SPECS

    \\n
      \\n
        \\n
      • Chord: 226mm
      • \\n
      • Projected area: 116,508.2 mm²
      • \\n
      • Wingspan: 685.4mm
      • \\n
      • AR: 4.0
      • \\n
      • Volume: 2,024,170 mm³
      • \\n
      \\n
    \\n

    Set includes:
    Top socket, mast, fuselage, grease, wing protectors, foam insert, 5mm allen key (5mm). Component screws: m8x25mm (4pcs),  m8x40mm (4pcs), Front wing screws: m8x45mm, m8x40mm, m8x27mm, rear wing screws: m8x20mm (2pcs).

    \\n

    []

    \"]"]

    UNDER THE HOOD

    TECHNOLOGY

  • We use a premium “A-grade” Paulownia wood core which is vertically laminated to optimize strength, reduce weight and allow the board to flex more naturally and freely. Found in all 2018 models.

  • Basalt is a volcanic mineral fiber which offers vibration resistance and durability while maintaining a high strength to weight ratio. Washed pure molten basalt rock is absent of toxic additives. The combination of wood core with basalt laminate provides a flex characteristic, unique to Cabrinha.